CN | EN
Products
Home>Products>P System>MDS series servo drivers
MDS series dc servo drivers
MDS series dc servo drivers

Application areas:

Vehicle-mounted equipment: launching device, artillery follow-up, vehicle-mounted platform, vehicle-mounted radar system, photoelectric following system, interference detection drive, erection system.

Ship equipment: naval gun follow-up, ship radar, offshore horizontal platform, launching device, weapon transfer system, ammunition delivery system, underwater weapon equipment, hanging bomb equipment.

Radar system, precision turntable: flight attitude test stand, shaft angle shaker, manned spaceflight ground and sea satellite tracking system, large radio astronomical telescope follow-up control, Antarctic research station.

product description:

Stars M series servo drives provide you with high-performance guarantee with excellent reliability, precise control and rapid response.

1. Cooling method: forced air cooling and self cooling;

2. Protection grade: IP20-IP65, can be customized according to special requirements;

3. Environmental conditions: working temperature range -40 ℃ ~ 40 ℃, derating is needed for higher temperature operation; storage temperature range -50 ℃ ~ 60 ℃

4. Damp heat: 30 ℃, below 98% RH (no condensation);

5. Altitude: below 2000m above sea level (use derating above 2000m);

6. Feedback components: resolver, magnetic encoder;

7. Vibration and shock standard: According to GJB standard.


modelMDS10D4250UMDS50D2500TMDS25D3250MDS10D550
basic parametersDriving frequency15±1KHz15±1KHz15.5KHz±1KHZ15±0.5KHz
Rated current8Apitch 16A/15℃Azimuth 14A /15℃ 25A5A
Maximum current16Apitch 47A 3S/30℃Azimuth 43A 3S/30℃35A10A
Overload time20s3s30S20S
Power supply conditionControl voltage electrical workSingle-phase 220 VAC power supply, power supply range to 220 + 15% for VAC, 50 hzSingle-phase 220 VAC power supply, power supply range to 220 + 15% VACSingle-phase 220 vac plus or minus 15%, 50 hz24 vac ac single-phase voltage range of plus or minus 15 ﹪ ~ 50 vac plus or minus 15 ﹪ (f = 50 hz), or the battery voltage range 20 VDC to 80 VDC
Power supply working voltagethree-phase 220V±15%VAC,50HzPitching three phase three wire70V±15%VACAzimuth three phase three wire 120V±15%VACthree-phase 220VAC±15%,50HzAs a set of power supply and control power
Feedback elementSpeed feedback (speed ring working mode), hall feedback (pure current loop)Hall feedback (pure current loop)Dc speed machineSpeed measuring machine
Structure (wall).wallwallwallwall,IP00
Cooling wayNatural coolingForced cooling fan (when ≧ drive temperature 40 ℃, open fan;The fan starts, close the fan drive temperature ≦30 ℃)Forced air cooling (convulsions), long life worksSince the cold with sufficient heat (space)
weight≦5㎏≤21Kg约为840g

modelMDS10D4250UMDS50D2500TMDS25D3250MDS10D550
basic parametersDriving frequency15±1KHz15±1KHz15.5KHz±1KHZ15±0.5KHz
Rated current8Apitch 16A/15℃Azimuth 14A /15℃ 25A5A
Maximum current16Apitch 47A 3S/30℃Azimuth 43A 3S/30℃35A10A
Overload time20s3s30S20S
Power supply conditionControl voltage electrical workSingle-phase 220 VAC power supply, power supply range to 220 + 15% for VAC, 50 hzSingle-phase 220 VAC power supply, power supply range to 220 + 15% VACSingle-phase 220 vac plus or minus 15%, 50 hz24 vac ac single-phase voltage range of plus or minus 15 ﹪ ~ 50 vac plus or minus 15 ﹪ (f = 50 hz), or the battery voltage range 20 VDC to 80 VDC
Power supply working voltagethree-phase 220V±15%VAC,50HzPitching three phase three wire70V±15%VACAzimuth three phase three wire 120V±15%VACthree-phase 220VAC±15%,50HzAs a set of power supply and control power
Feedback elementSpeed feedback (speed ring working mode), hall feedback (pure current loop)Hall feedback (pure current loop)Dc speed machineSpeed measuring machine
Structure (wall).wallwallwallwall,IP00
Cooling wayNatural coolingForced cooling fan (when ≧ drive temperature 40 ℃, open fan;The fan starts, close the fan drive temperature ≦30 ℃)Forced air cooling (convulsions), long life worksSince the cold with sufficient heat (space)
weight≦5㎏≤21Kg约为840g

伺服驱动器 

NAS 2 G 4.5 / 13.5 P-J

代码/数字

含义

NAS

产品系列代号

2

电源电压等级:2单相220VAC / 4三相380VAC / 5三相480VAC

G

产品设计代号:G第六代设计

4.5

额定电流:4.5A

13.5

最大电流:13.5A

P

反馈方式:P兼容17Bit磁编码器和23Bit绝对值位置编码器

J

驱动器版本:J通用版 / IIO增强版 / EEtherCAT通讯版


Series nameUpload timeIndustryDownload
100W-5.5KW伺服选型手册2020-04-07
Terms of usePrivacy PolicySitemap