E series PM servo motor

Advantages: large power-to-volume ratio, torque overload ratio is greater than 2.2 times. 1. Cooling method: forced air cooling, natural cooling or water cooling; 2. Protection level: IP54; 3. Insulation class: F; 4. Environmental conditions: relative humidity 90% ~ 95%, working temperature -20 ° C ~ + 40 ° C, storage temperature -25 ° C ~ + 70 ° C, altitude above 1000 meters, derating 10% for every 1000 meters. ; 5. Installation form: below 230 bases: flange; above 350 bases: flange + base; 6. Shaft: shaft extension with closed keyway; 7. Temperature sensor: KTY84-130; 8. Optional brake; 9. Feedback components: resolver, magnetic encoder; 10. Supply voltage of supporting servo driver: three-phase 380VAC.

B series PM motor

Advantages: The torque overload ratio exceeds 3.5 times, and the response is quick. 1. Cooling method: forced air cooling; 2. Protection level: IP54; 3. Insulation class: F; 4. Environmental conditions: relative humidity 90% ~ 95%, working temperature -20 ℃ ~ + 40 ℃, storage temperature -25 ℃ ~ + 70 ℃, altitude below 1000 meters, derating 10% every time it exceeds 1000 meters 5. Installation form: flange; 6. Shaft: shaft extension with closed keyway; 7. Temperature sensor: KTY84-130; 8. Optional brake; 9. Feedback element: resolver; 10. Supply voltage of supporting servo drive: three-phase 380VAC, other voltage levels can be customized.

NAS E series ac servo motors

The whole series adopts resolver feedback, which can realize torque control, speed control and closed-loop control of the motor shaft position. In addition, it can also accept photoelectric encoder feedback and grating scale feedback to achieve the final full closed-loop control of the control target. 1. Precision control (speed accuracy 0.1%, torque fluctuation less than 1%); 2. More energy-saving (10-15% more energy-saving than ordinary servo); 3. Strong explosive force (15ms acceleration at no load, 26ms acceleration at full load).

IAS-E series servo drivers

IAS series AC servo drive system is a high-performance AC servo system specially developed by Star Technology for electric injection molding machines. This series of products is divided into IAS-E series servo drives and B series and E series servo motors. The IAS series has the characteristics of fast response and precise control, which can perfectly realize the control of the injection and sol of the electric injection molding machine by the servo system.

G系列伺服电机

绝缘耐压等级：F 级
保护型式 IP54，强制风冷
振动等级：振动加速度 5g （即:49m/s2）
安装方式：法兰安装
使用环境温度：-10℃～+40℃
存环境温度：-20℃～+60℃
湿热：95%RH 以下(不凝露)
标准高度：海拔 1000m 以下（1000m 以上请降额使用）
反馈元：旋转变压器